Το Van den Hul Revolution Hybrid ειναι υβριδικο ομοαξονικο καλωδιο ηχειων, παχους 8.4AWG, με αγωγους επαργυρου χαλκου και ινων ανθρακα.
Η τιμη αφορα 1 μετρο.
During the great success of The REVELATION HYBRID, there was the question if it was possible to produce a lower priced version.
This was the moment The REVOLUTION HYBRID was born: a single-lead  loudspeaker cable with the same sonic properties but smaller in size.
 
The general construction is the same as with The REVELATION HYBRID:
    - First an inner group with 308 x 0.14 mm. very high grade Matched  Crystal (MC) OFC strands with a dense coating of very pure silver. The  inner group exhibits a total metal cross-section area of 4.74 mm².
- Covering this core is a Linear Structured Carbon ® (LSC) saturated  layer which bridges minor defects and captures and transforms the  radiated magnetic field of the inner conductor to an audio signal again.
- The helically wound outer conductor structure employs the same  silver coated MC OFC metal quality as found in the core and consists of  16 separate conductors, each with 19 strands of 0.11 mm. This produces a  metal cross-section area of 2.89 mm². These 16 outer conductors are  individually insulated and are standardly wired in parallel with the  centre conductor, giving a single lead cable. Their being individually  insulated however also allows them to be wired together as a separate  signal return. (Versions wired as such and fit with matching connectors  are available either as twin-lead speaker cable or as single-ended  interconnect on special customer demand).
- The total metal cross-section area of The REVOLUTION HYBRID is 7.63  mm² giving the cable its very low resistance of 0.226 Ohm/100 m.
The outer jacket is made of red HULLIFLEX ® 3, a mechanically superb insulation material.
The REVOLUTION HYBRID can also be used as a fantastic single-ended  interconnect in combination with our C – 8.4 RCA type connector.